Table of Contents
Advertisement
Problems with Wi-Fi signal
Possible cause
Trouble with wireless network signal.
New router installed or router configuration
changed.
The wireless network signal is weak.
The wireless signal is disrupted by another mi‐
crowave oven placed near the appliance.
12.2 How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
F111 - Food sensor is not correctly inserted in‐
to the socket.
F601 - there is a problem with Wi-Fi signal.
F604 - the first connection to Wi-Fi failed.
F908 - the appliance system cannot connect
with the control panel.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
TROUBLESHOOTING
Remedy
Check if your mobile device is connected to the
wireless network.
Check your wireless network and router.
Restart the router.
To configure appliance and mobile device
again, refer to "Before first use" chapter, Wire‐
less connection.
Move router as close to the appliance as possi‐
ble.
Turn off the microwave oven.
Avoid using another microwave oven and the
Remote Control of the appliance at the same
time. Microwaves disrupt Wi-Fi signal.
Remedy
Fully plug Food sensor into the socket.
Check your network connection. Refer to "Be‐
fore first use" chapter, Wireless connection.
Turn the appliance off and on and try again. Re‐
fer to "Before first use" chapter, Wireless con‐
nection.
Turn the appliance off and on.
43/52
Advertisement
Table of Contents
