Rear Panel - Planet ICA-750 User Manual

1.5.2 Rear Panel

The rear panel of ICA-750 is shown below.
I/O Information
Port Definition
PORT
Reset
LAN (PoE)
PWR
DI / DO
AUDIO IN
AUDIO OUT
Dual Mode CCD Box Internet Camera
Reset
DI / DO
PWR
PORT Description
Reset to manufacturer default valued and reboot.
When pressed and held over 10 seconds, the settings of IP
Camera will be set to the default values.
Upon completion, the PWE LED will blink three times.
Connect your Camera to a 10/100Base-TX hub or switch. It is
compliant with IEEE802.3af standard PoE. Both mid-span &
end-span can be used.
Connect to the supplied power adapter 12V DC, 1A. When this
device is obtaining power from PoE already, you don't have to
attach the power adapter to ICA-750.
The terminal block includes 2 input ports and 2 output ports.
An external microphone can be plugged in. That will disable the
built-in microphone on the front panel.
An external speaker can be plugged in.
LAN (PoE)
AUDIO AUDIO
IN OUT
9