Table of Contents
Advertisement
Internet Camera User Guide
Focus Ring
Microphone
Ready LED
Active LED
LAN LED
Wireless LED
Rear Panel
Antenna
Power Input
MIC In
Normally, it is not necessary to adjust the focus. The default
focus range is from 1 meter (3 feet) to infinity. If the image is
not clear, try adjusting the focus.
The built-in microphone is mounted on the front. There is also
a connection for an external microphone on the rear. Connect-
ing an external microphone will disable the built-in
microphone.
On - Power on.
Off - No power.
Blinking - The Ready LED will blink during start up. This will
take 15 to 20 seconds.
Off - Idle.
Blinking - Wireless/Ethernet Internet Camera is providing a
live video stream to at least one viewer.
On - LAN port is connected to a hub or switch.
Off - LAN port is not connected.
Blinking - Data is being transmitted or received via the LAN
port.
(Wireless Internet Camera only)
On - Wireless interface is active.
Off - Wireless interface is not available.
Blinking - Data is being transferred via the Wireless interface.
Attach the supplied antenna here. The antenna is adjustable;
best results are usually obtained with the antenna positioned
vertically.
Connect the supplied power adapter here.
If required, an external microphone can be attached here.
Attaching a microphone here will disable the built-in micro-
phone on the front. Microphones designed to be used with
PCs are usually compatible with this microphone input.
4
Advertisement
Table of Contents
