Rear Panel - Planet ICA-230 Quick Installation Manual

2.1.2 Rear Panel

DC Power Jack
Audio Output Jack
Audio Output Audio-out Jack allows this device to output audio or alerting
Jack sound.
The input power is 12VDC.
DC Power Jack Note: Only use the power adapter supplied with ICA-230/
M230. Otherwise, the product may be damaged.
The LAN socket is a RJ-45 connector for connections to
10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This
Ethernet port built N-Way protocol can detect or negotiate
the transmission speed of the network automatically. Please
use Category 5 "straight through" cable to connect the ICA-
LAN Socket
230/M230 to a 100Mbps Fast Ethernet network switch or hub.
The LAN socket is compliant with IEEE802.3af standard PoE
interface.
Note: If you need to connect the ICA-230/M230 to PC or
notebook directly, you should use cross over cable instead.
Factory This button is hidden in the pinhole. Please refer to the
Default Reset Appendix A in manual for more information.
Factory Default
LAN Socket