Rear Panel - Planet ICA-750 Quick Installation Manual

3.2 Rear Panel

I/O Info
PORT PORT Description
Reset to manufacturer default valued and reboot.
When pressed and held over 10 seconds, the settings of IP
Reset
Camera will be set to the default values.
Upon completion, the PWE LED will blink three times.
Connect your Camera to a 10/100Base-TX hub or switch. It is
LAN (PoE) compliant with IEEE 802.3af standard PoE. Both mid-span &
end-span can be used.
Connect to the supplied power adapter 12V DC, 1A. When this
PWR device is obtaining power from PoE already, you don't have to
attach the power adapter to ICA-750.
DI / DO The terminal block includes 2 input ports and 2 output ports.
An external microphone can be plugged in. That will disable the
AUDIO IN
built-in microphone on the front panel.
AUDIO OUT An external speaker can be plugged in.

Reset
PWR
DI / DO
LAN (PoE)
AUDIO AUDIO
IN OUT