Hardware Installation - Planet IVS-100 User Manual

IVS-100 User's manual

Hardware Installation

1. Attach video source to Video Server
To use Video Server, user must supply video signal to this device. Typical, user
may utilize standard camera, doom camera, bullet camera, PT camera, Speed
doom camera, or others as the video source. Connect the BNC terminal of
camera to IVS-100's video input and make sure to power on your camera first.
2. Attach Audio source to Video Server (option)
If user needs not only video stream but also audio stream, then the audio source
is attached to Video Server at the time. User may utilize line output of standard
camera or audio amplifier, or others as the audio source. Connect the RCA
terminal of audio device's line output to IVS-100's RCA input and make sure to
power on your camera or audio device first.
3. Plug an Ethernet cable into Video Server
Connect an Ethernet cable to the LAN socket located on IVS-100's front panel and attach it to the
network.
4. Connect the external power supply to Video Server
9/79