Planet IVS-100 User Manual page 28

IVS-100 User's manual
IVS-100 can directly connect to the ADSL, however, it should be setup on LAN
environment to setup the PPPoE information, and then connect to the ADSL modem.
Power on again, then IVS-100 will dial on to the ISP connect to the WAN through the
ADSL modem.
The procedures are
• Connect to the LAN by DHCP or Fixed IP
• Access IVS-100, enter Setting è Network.
• Check the radio button of "PPPoE Setting".
• If the ADSL Modem and Video Server were connected on a hub, after IVS-100
information were inputted, then you can press "Dial" to do the PPPoE dial.
• Input the "User" and "Password" fields by the account and password provided by
the ISP.
• If the check box of "Send Mail after dialed" was checked, then the "MailServer" and
"User on the MailServer" field need to be filled.
• If the mail server needs authentication, then the check box of "Password" needs to
be checked, and password information need to inputted.
28/79