Planet IVS-100 User Manual page 19

IVS-100 User's manual
2 Camera
Zoom
3 Camera
Speed
4 Adjust
Camera
Focus
5 Recall/Preset
mode
6 Video
Resolution
7 Preset or
Recall
positions
8 Video
Brightness
Adjustment
9 Image quality
10 Frame rate
adjustment
directly
11 Audio On/Off
Adjust camera optical zoom in/zoom out
(Noted: PTZ camera available only)
Adjust camera focus
(Noted: PTZ camera available only)
Preset: set up camera fixed locations before operation
Recall: Set camera position to preset location
Adjust Video resolution
Video Server provides 4 resolutions:
640x480, 352x288, 320x240, 176x144
For NTSC camera: 320x240 is suitable
For PAL camera: 352x288 and 176x144 are suitable
However, all resolution are available for NTSC and PAL camera
Preset or Recall camera 1~16 location(s)
Ex. If you press 5, then the camera will move to preset location
5.
Adjust Camera video brightness
Adjust image quality.
Clarity: Video is better but frame rate may be slower
Fluency: Video is not as good as Clarity but frame rate may be
higher
Default: System default value
Adjust video frame rate via giving a number directly
Turn on/off audio output function.
Note: There's a Microphone hole on the back panel. You need
to position the MIC hole face to the audio source to have better
audio quality.
19/79