Planet IVS-100 User Manual page 44

IVS-100 User's manual
Warning:
The download firmware procedure cannot be interrupted. If the
power and/or network connection are broken during the download procedure, it
might possibly cause serious damage to IVS-100. Suggest that do not upgrade
firmware via Wireless LAN due to high error rate possibly.
Please be aware that you should not turn off the power during updating the firmware and
wait for finish message.
Once the upgrading process completed, IVS-100 will reboot the system automatically.
Note: please wait for 20 seconds, and then you can connect to Video Server again.
Factory Default
: Recall IVS-100 factory default setting
The "Factory Default" button will restore to the factory default configuration, all
information changed and saved on the flash will be lost, and restored to the factory
default setting.
Check the "Restore" box, then click "Reboot" button. You will be prompt before
restore to factory default setting.
Select "OK" to continue, or "Cancel" to abort it.
44/79