Planet IVS-100 User Manual page 10

IVS-100 User's manual
Connect the external power supply to the DC power connector attached on the
extension cable from IVS-100. Note: use the power adapter, 12VDC, included in the
package and connect the other end to wall outlet for AC power.
When you have installed IVS-100 well, the status LED will turn green. It means the
system is booting up successfully. Furthermore, if you have a proper network connection,
and access to IVS-100, the 10/100M LAN LED will flash orange
5. Connect RS485
When users would like to apply a camera with P/T function, they usually need to connect
their communication port (for camera control) through RS485. After RS-485 was
correctly connected to D+ and D-, the remote users could control the camera through
Internet.
10/79