Basic Settings; Selecting Color Or Black And White Copies - Xerox Color 550 User Manual

To stop a copy job, press the red Stop button on the control panel. On the touch
screen, touch Resume to continue the job, or Cancel to cancel the job completely.
5. If desired, change the copy settings. For details, see Adjusting Copy Options.
6. Press the green Start button on the control panel.

Basic Settings

The Copy tab appears when the touch screen Copy button is touched. Use the Copy
tab to change the following basic settings:

Selecting Color or Black and White Copies

Reducing or Enlarging the Image
Selecting the Tray to Use for Copies
Specifying 2-Sided Originals or Copies
Collated Copies
Uncollated Copies
Stapling Copies
Hole Punching Copies
Creating Booklets
Selecting Color or Black and White Copies
If the original document contains color, you can create copies in full color, in single color
(monochrome), in dual color, or in black and white.
To select the output color:
1. Touch Copy on the touch screen.
2. Touch the desired output color:
Auto Detect: this option detects the color content in the original document, and
makes copies in full color if the original is a color document, or in black only if
the original is a black and white document.
Color: this option copies in full color output using all four printing colors (cyan,
magenta, yellow, and black).
Black and White: this option copies in black and white only. Colors in the original
are converted to shades of gray.
Dual Color: this option allows you to separate the colors of the original into two
groups of colors for copying. The Source Color will be extracted from the original
and be replaced by the Target Area Color. The rest of the colors will be replaced
by the Non-Target Area Color you select.
Single Color: this option allows you to copy in one of twelve preset or custom
colors.
Xerox Color 550/560/570 Printer
®
User Guide
Copying
7-3