Xerox Color 550 User Manual page 237

Fault Code
024980
024981
024982
024983
024984
024985
024987
024988
024989
047320
112700
116790
124705
124706
124709
Xerox Color 550/560/570 Printer
®
User Guide
Possible Cause
The finisher stacker tray is full
The finisher top tray is full
The finisher stacker tray lower
safety warning is on
The finisher booklet tray is full
The booklet stapler low staple
F signal is on
The booklet stapler low staple
R signal is on
The booklet folder tray is full
The booklet folder tray is full
There is a problem with the
booklet maker stapler
A communication error has
occurred with the Finisher
Punch Waste Container is full
or near full
The settings for stapling are
canceled and prints the data
The settings for punching are
canceled
The settings for folding are
canceled
The number of pages exceeds
the number of pages that can
be stapled
Standard/Booklet Maker Finisher
Recommended Solution
Remove all paper from the stacker
tray.
Remove all paper from the finisher
top tray.
Remove all paper from the stacker
tray and remove any other obstruc-
tions.
Remove all paper from the booklet
tray.
Remove all paper from the booklet
tray.
Remove all paper from the booklet
tray.
Remove all paper from the tray. Set
the output tray for threefold.
Check that the folder tray is correctly
attached and set.
Check the staple cartridge and reset
correctly.
Power Off/On the machine. If the er-
ror persists, contact the Customer
Support Center.
Remove and empty the waste contain-
er and reinstall.
Confirm the staple position and try
to print again.
Confirm the punching position and
try to print again.
Confirm the folding settings and try
to print again.
Decrease the number of pages, or
cancel the stapling settings, then try
to print again.
13-41