Operation And Adjustment - ProForm 620 Zlt Treadmill User Manual

2. See the inset drawing. Hold the receiver (A)
so that the antenna (B) is oriented as shown.
Peel the paper backing off the pad on the bot-
tom of the receiver. Press the receiver onto the
Access Door (80) as shown.
Connect the wire on the receiver to the indi-
cated wire extending from the Console Base
(58). Make sure that no wires are pinched.
Reattach the Access Door (80) with the #8 x 3/4"
Screw (4). Discard the other wires included with
the receiver.

OPERATION AND ADJUSTMENT

HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
resistance for electric current to reduce the risk of
electric shock. This product's power cord has an
equipment-earthing conductor and an earthing plug.
IMPORTANT: If the power cord is damaged, it must
be replaced with a manufacturer-recommended
power cord.
DANGER:
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product
is properly earthed. Do not modify the plug
provided with the product—if it will not fit
the outlet, have a proper outlet installed by a
qualified electrician.
Improper connection of
GR
2
58
Wires
A
80
B
UK
Follow the steps below to plug in the power cord.
1. Plug the indicated end of the power cord into the
socket on the treadmill.
Socket on Treadmill
2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with
all local codes and ordinances.
UK
Outlet
14
80
4
AUS
Power Cord
Australia
Outlet
UK
FR/SP