Gold's Gym GGCCBE8057.0 User Manual page 15

20. Attach a Barbell Guide (112) to the Top Frame
(17) with an M10 x 55mm Bolt (127), two M10
Washers (148), two M10 x 6.5mm Spacers (151),
and an M10 Nylon Locknut (153).
Attach the other Barbell Guide (not shown) to
the Top Frame (17) in the same way.
See steps 14, 16, and 17. Tighten the M10 x
110mm Screws (130).
21. Attach a Weight Carriage Guide (21) to the
Weight Carriage Base (20) with an M10 x 55mm
Bolt (127), two M10 Washers (148), two M10 x
6.5mm Spacers (151), and an M10 Nylon Locknut
(153). Do not tighten the Nylon Locknut yet.
Attach the other Weight Carriage Guide (21) to
the Weight Carriage Base (20) in the same
way.
22. Slide the two Weight Carriage Bumpers (138)
onto the Weight Carriage Guides (21).
Orient the Weight Carriage (19) as shown, and
slide it onto the Weight Carriage Guides (21).
Tighten the two Weight Carriage Tubes (96) onto
the Weight Carriage. Next, slide the Weight
Bumpers (97) onto the Weight Carriage Tubes.
20
153
21
22
96
19
138
15
148
151
151
17
127
148
112
21
21
153 151
148
148
151
20
97
21
Hole
97
96
127