SMART Board Board 600iv Configuration And User's Manual page 25

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
Tint Adjusts the image color balance of red
and green from 0 to 100.
White Peaking Adjusts the image color brightness
from 0 to 10 while providing more
vibrant white shades.
Degamma Adjusts the color performance of the
display from 0 to 3.
Color Adjusts the Red, Green, Blue, Cyan,
Magenta and Yellow colors on the
projector from 0 to 100 to provide
custom color and luminance output.
Audio menu
Volume Increases and decreases the
projector's volume from 0 to 40.
Mute Mutes the projector's audio output.
Disable Volume Disables the projector's volume
Control control.
Closed Captioning Turns closed captioning on or off.
Closed Captioning Sets the closed captioning language to
Language CC1 or CC2.
Default menu
3D On/Off Turns the 3D feature on or off.
3D Format Displays the current 3D format
(Interleaved or Under-over).
3D Invert Selects the 3D Invert setting (L-R or R-
Left-Right L).
15
Notes
This setting applies to S-video and
composite video inputs only.
A value closer to 0 creates a natural
image and a value closer to 10
enhances brightness.
Each color has a default value of 100.
Adjustments to the color settings
register to the User mode.
The default is 0.
If you mute the projector's audio output
and then increase or decrease the
volume, the volume is restored
automatically. You can prevent this
from happening by disabling the
volume control.
Typically, CC1 displays American
English subtitles, while CC2 displays
other regional languages, such as
French or Spanish, depending on
television channel or media setup.
The default is off.
Interleaved breaks down the image
frame for each eye, alternately
displaying a line of visual information
from each frame.
Under-over concurrently displays
horizontally stretched image frames for
each eye, one above the other.
L-R displays visual data for the left eye
first.
R-L displays visual data for the right
eye first.