Setting The Heat Setting; Switching On The Dual Fry/Cook Area; Residual Heat Indicator - AEG COMPETENCE 40036VI Installation And Operating Instructions Manual

Setting the heat setting

1. Select the heat setting.
2. To end the cooking process, turn back
to the Off position.

Switching on the dual fry/cook area

1
The control for the dual fry/cook area is switched on by turning to the
right, and cannot be turned past the stop!
1. Turn the dual fry/cook control to the
right. Continue turning to Position 9,
and onto the
a slight resistance). The stop position
will then be clearly detectable.
2. Finally, turn back to the desired set-
ting.
3. After cooking, turn back to the OFF position.
3
To use the dual fry/cook area again afterwards, the larger ring must be
switched back on.

Residual heat indicator

The residual heat indicator lights up, as soon as the corresponding
cooking zone is hot.
1
Danger! Risk of burns from residual heat. After being switched off, the
cooking zones need some time to cool down. Look at the residual heat
indicator.
2
Residual heat can be used for melting and keeping food warm.
symbol (you will feel
13