Myway Default Settings; First Time Simple Configuration Wizard - NetComm MyWay YMLO-3G8WV User Manual

2.10 MyWay Default Settings

LAN (Management)
Static IP Address:
Subnet Mask:
Default Gateway:
WAN (Internet)
WAN mode:
Wireless
SSID:
Security:
Security Key:
*For security purpose, each MyWay comes with a unique SSID that varies by a 4 digit number at the end eg. SSID: "NetComm Wireless 1234."
MyWay Web Interface Access
Username:
Password:

2.11 First Time Simple Configuration Wizard

Once you have logged in to your MyWay for the first time, you will be presented with the MyWay "Set-up Wizard" as shown in the
screenshot below. This wizard can be skipped by clicking on the skip link. You can re-run the Setup Wizard later by selecting the
"Startup Wizard" option under "Administration" tab in the Advanced View of the management console.
Select your Language Preference and Time Zone then click "Next";
NetComm MyWay – 3G WiFi Router with Voice User Guide
10
192.168.20.1
255.255.255.0
192.168.20.1
DHCP
NetComm Wireless XXXX*
WPA-PSK
Refer to your wireless security card or label on the bottom of your MyWay.
admin
admin
YMLO-3G8WV
www.netcomm.com.au