Table of Contents
Advertisement
4 Management Console
4.1 Basic Status Overview
The basic status page provides basic system related information. It is shown after logging in to the MyWay, and can also be accessed by
selecting Basic Status from the menu.
The status page shows the 3G connection status, Signal Strength (dBm) and SIM Status.
4.2 3G Settings
The 3G Operation mode can be configured on this page. This allows for automatic failover to be configured if desired. Please see the
table below for options allowed for the 3G operation mode:
'Always ON'
'OFF'
'Automatic 3G Backup'
Click "Save and apply settings" to finish.
NetComm MyWay – 3G WiFi Router with Voice User Guide
18
Enables the 3G internet connection and, does not disconnect, even if idle.
The MyWay will not connect to the Internet
The Automatic 3G Backup feature of the MyWay is designed to provide a backup 3G Internet connection when you
use the WAN connection as your primary, when the primary fails. The Internet connection will automatically switch back
to your WAN connection once your WAN Internet connection is back online. To use this feature, you will need both an
Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a 3G connection. To configure your WAN
settings according to your network environment, please switch to advanced view "Internet Settings" then select "WAN".
YMLO-3G8WV
www.netcomm.com.au
Advertisement
Table of Contents
