Internet Settings - NetComm MyWay YMLO-3G8WV User Manual

5.2 Internet Settings

5.2.1 3G Internet Settings
This page allows you to setup your WWAN (Wireless Wide Area Network) connection.
Profile Name
APN
3G NAT
Interface Metric
Operation Mode
'Always ON'
'OFF'
'Automatic 3G Backup'
5.2.2 Band Settings
Band Settings: By default the MyWay will automatically choose the operator and band based on the SIM card inserted. If required, you
can choose a specific band or operator on this page.
5.2.3 WAN
The WAN page allows you to configure the optional WAN Ethernet port. Select the WAN connection type suitable for your environment
and configure parameters according to the selected connection type.
NetComm MyWay – 3G WiFi Router with Voice User Guide
22
Description for the profile
Please enter the APN name you wish to connect to in this field. Please don't edit this unless you are aware of what
effect it will have.
Enabled by Default, this option allows you to switch NAT (Network Address Translation) on or off.
This field allows you to customize the metric of the 3G interface. This setting will have no effect for most users, but may
be required for advanced routing configurations (Static Routes, RIP, VPN, etc)
There are 3 Options as follows:
Keeps the Internet connection alive, does not disconnect
Does not connect to the Internet
The Automatic 3G Backup feature of the MyWay is designed to provide a backup 3G Internet connection when you
use the WAN connection as your primary, when the primary fails. The Internet connection will automatically switch back
to your WAN connection once your WAN Internet connection is back online. To use this feature, you will need both an
Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a 3G connection.
YMLO-3G8WV
www.netcomm.com.au