Table of Contents
Advertisement
Product Layout
Connecting and Configuring your Router
The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization.
The display is easily visible on the front of the Router to provide you with information about network activity and status. See below for
explanation of each of the features.
Front Panel
Power
Wireless LAN
LAN Ports (1-4)
WAN
USB
USB port
Rear Panel
Reset/WPS Button
Wireless (Off-On)
WAN
LAN (1-4)
12VDC
Network and System Requirements
Before continuing with the installation of your 3G18Wn - 3G Wireless N300 Router, please confirm that you comply with the minimum
system requirements below.
•
Compatible 3G USb modem with Active Sim/Data Service if you want to use 3G broadband service.
Note: Subject to terms and conditions from your 3G mobile broadband Service Provider.
•
Computer with Windows, Macintosh, or Linux-based operating systems with a working Ethernet adapter with TCP/IP Protocol
installed.
•
A Web Browser such as Internet Explorer, Netscape Navigator, Mozilla Firefox, Opera, Safari etc.
Wireless Computer System Requirements
•
Computer with a working IEEE 802.11b, IEEE 802.11g or IEEE 802.11n wireless adapter.
3G18Wn User Guide
10
Icon
Description
Lights up when powered oN.
Lights up when WLAN is enabled. Blinks on traffic
Lights up when specific LAN connection is established. Blinks on LAN PORT traffic
Lights up when WAN connection is established
Lights up when a 3G internet connection is established
USb port for connecting a compatible 3G USb modem.
Press once to initiate WPS (see WPS section of this document). Hold this button down for
10 seconds to reset to factory defaults.
Switches the Wi-Fi Access Point on/off
WAN Ethernet port for Fixed Line (ADSL/Cable/Satellite) connection
LAN Ports for wired Ethernet clients (Computers, Laptops, etc)
Power connector, connects to DC 1V 1A Power Adapter
ymL18WN
ymL18WN
18WN
www.netcomm.com.au
Advertisement
Table of Contents
