Speed Dial/Conf; Sustained Auth Code - Aastra Clearspan 6739i User Manual

Function
Speeddial/Xfer and Blind Transfer
Speeddial/Xfer and Call Forward
6.24

Speed Dial/Conf

The Speeddial/Conf softkey allows you to conference another party at a pre-defined number while
on an active call. The line focus changes to the dialing line. A cancel softkey displays on the
phone allowing you to abort the conference speeddial if required.
The following messages display:
Ringing... - Displays when the far end is ringing.


Conf. Unavailable - Briefly displays when a conference is already in progress.
For example, while on a call, you can use the Speeddial/Conf softkey to dial a recording service
and have the resulting conference recorded.
If currently in a conference, the Speeddial/Conf softkey is disabled on the active call.
6.25

Sustained Auth Code

You can enter a Feature Access Code to unlock the authorization code when calling from the
phone. When the feature is enabled, you are not prompted for an auth code every time you make a
call that requires an authorization code.
You can enter a separate code to turn this feature off.
Step Action
Sustained Authorization Code Activation (Calls Unlocking)
Press *47.
1.
Sustained Authorization Code Deactivation (Calls Locking)
Press *37.
1.
___________________________________________________________________________________________
6739i IP PHONE USER GUIDE - CLEARSPAN
AASTRA - 2832-001
Description
When the phone is connected to a call, pressing the
Speeddial/Xfer key blind-transfers the call to the
predefined destination.
If the transfer fails, the message "Transfer Failed"
displays, and you can retry the call by pressing the line
key again.
Pressing the Speeddial/Xfer key while the phone is
ringing forwards the call to the predefined number.
Result
The feature is turned on.
The feature is turned off.
PAGE 83 OF 120