Aastra Clearspan 6739i User Manual page 33

Feature
Centralized Conferencing
Clear Voice Message Waiting Indicator
Customer Originated Trace
Diversion Inhibitor
Music on Hold Per-Call Deactivation
No Answer Timer
Per Call Account Code
Push to Talk
(Intercom)
Shared Call Appearance Location Control
Activation and Deactivation
Sustained Auth Code Activation and
Deactivation
___________________________________________________________________________________________
6739i IP PHONE USER GUIDE - CLEARSPAN
AASTRA - 2832-001
Description
Allows you to create multiple conferences
with unlimited participants (depending on
your server limitations) when enabled by the
system administrator.
Clears the voice message indicator lamp.
Allows you to start a trace after an
obscene, harassing, or threatening call.
Prevents redirected calls from being
redirected again by the called party.
Allows you to enable/disable Music On
Hold on either a per-call or persistent
basis. This feature is especially useful when
participating in a conference call.
Allows you to set the number of rings
before a call is forwarded by setting the
no-answer timer.
Allows you to enter an account code
before making a call. You are prompted
for an account code, you dial the code,
receive confirmation, and then proceed
with the call as usual. The sequence is as
follows:
[Off-hook] [FAC] [prompt] [code]
[confirmation] [dial tone] [call]
Allows you to call another station where the
system requests that the destination station
automatically answer, providing intercom-
like functionality.
A user or administrator can specify an
accept list and a reject list. These are used
to screen incoming Push-To-Talk sessions.

The accept list indicates which users
are allowed to call a station.

The reject list indicates which users
are not allowed to call a station.
In both lists, a wildcard can be used, which
indicates all stations.
Allows you to activate or deactivate the
shared call appearance at a particular
station.
Allows you to unlock calls by having the
Calling Plan service use a sustained
authorization code for all calls instead of
prompting for the code on a per-call basis.
You can also disable the sustained
authorization codes feature, which restores
the collection of authorization codes for all
calls.
PAGE 33 OF 120