Autodial (Hotline And Warmline); Transfer - Aastra Clearspan 6739i User Manual

6.2

Autodial (Hotline and Warmline)

With the Autodial feature, your phone automatically dials a pre-configured number whenever it is
off-hook. The Autodial functions as follows depending upon the configuration:
 Hotline: The IP phone immediately dials a preconfigured number when you lift the handset.
 Warmline: The IP phone waits for a specified amount of time after you lift the handset before
dialing a preconfigured number. If you do not dial a number within the time allotted, then the IP
phone begins to dial the number.
The Autodial feature is available on a global or per-line basis.
Notes:
Any speeddial numbers configured on your phone are not affected by autodial settings.
If Autodial is configured on your phone, any lines that function as hotlines do not support conference
calls, transferred calls, and/or intercom calls.
6.3

Transfer

Step Action
Unannounced (blind) transfer:
When you transfer a call directly to another party and complete the transfer without consulting
with the receiving party, it is an unannounced transfer.
From a connected call:
1.

Or

Enter the number of the destination party.
2.
___________________________________________________________________________________________
6739i IP PHONE USER GUIDE - CLEARSPAN
AASTRA - 2832-001
Press on the front panel
of the phone.
Press on the screen.
Result

The calling party is placed on hold.

You hear dial tone.
John Smith
Voice Mail
Mary Jones
1003
Forward
1005
Spd100
Call Return
Cancel
Intercom Dial
Lock Lines Transfer
The number is automatically dialed.
You can use the Dial softkey for numbers
that are not automatically dialed.
05/14/11
12:15pm
DND
SpdXfer
SpdConf
Brian
Edward
. .
PAGE 66 OF 120