Selecting and Creating Tones
Editable Parameters for PCM Melody Tone (Non-drum PCM Tones)
There are two types of parameters: PCM melody tone specific editable parameters and the same parameters that apply to the
other tone categories.
The drum sets in the PCM tones have different editable parameters. See "Editable Parameters for Drum PCM Tone" for more
information about them.
■ Editable Parameters for Non-drum Set PCM Tone
Preparation
Display the screen in step 2 of the procedure under "To edit and save a tone as a user tone" on page E-20.
Editable Parameter List
Display Text
Atk.Time
Attack time. Specifies the time it takes to reach peak value from note on.
Rel.Time
Release time. Specifies the time it takes for a sustained sound to decay after a key is released.
Cutoff
Cutoff frequency. Specifies the tone cutoff frequency.
Vibrato type. Specifies one of the wave types below to be used for vibrato.
Vib.Type
Sin (sine wave), Tri (triangular wave), Saw (sawtooth wave), Sqr (square wave)
Vib.Depth
Vibrato depth. Specifies how vibrato is applied.
Vib.Rate
Vibrato rate. Specifies the vibrato rate (frequency).
Vib.Delay
Vibrato delay. Specifies the delay in the timing for applying vibrato.
Oct.Shift
Octave shift. Changes the tone of notes in octave units.
Touch sense. Specifies the degree of change in volume in accordance with change in keyboard
TouchSense
playing touch.
■ Editable Parameters Common to Other Tone Categories
See "Other Editable Items" on page E-29.
E-30
Description
Settings
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
Sin, Tri, Saw, Sqr
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
–2 to 0 to +2
–64 to 0 to +63