Loading Data From A Memory Card; To Load Data To Synthesizer Memory From A Memory Card; To Batch Load All Synthesizer Memory Data From A Memory Card; To Delete A File From A Memory Card - Casio XW-G1 User Manual

Using a Memory Card
Loading Data from a Memory
Card
• Make sure that all of the data you want to load is in the
MUSICDAT folder on the memory card.
To load data to Synthesizer memory from a
memory card
1.
Insert the memory card into the card slot.
2.
Referring to the table in step 2 of the procedure
under "To save Synthesizer data to a memory
card" (page E-88), perform the procedure
required for the type of data you want to load
from the card.
br
3.
Use the up (q) and down (w) buttons to
move the item selection cursor (0) to "Card
Load" (or "Load" if you want to load all data)
br
and then press
• This causes a menu screen like the one shown below
to appear on the display. The sample screen below
shows the screen that appears when you perform this
procedure from the Step Sequencer Mode.
4. bp
Use the dial or
buttons to display the file you want to import.
5. br
Use the down (w) button to move the
cursor downwards, and then use the
br
minus (–) and plus (+) buttons to display the
destination of the load operation.
br
6.
Press the ENTER button.
7.
In response to the "Sure?" message that
appears, press the
br
NO button to cancel.
E-90
ENTER.
br
minus (–) and plus (+)
bp
br
YES button to load or the
To batch load all Synthesizer memory data
from a memory card
1.
Press
2.
Use the
move the item selection cursor (0) to
"CardUtility" and then press
• This causes the "CARD UTIL" screen to appear.
3.
Use the
move the item selection cursor (0) to "All
Data" and then press
• The remainder of the steps are the same as those from
step 3 under "To load data to Synthesizer memory from
a memory card" (page E-90).
To delete a file from a memory
card
1.
Insert the memory card into the card slot.
2.
Press
3.
Use the
move the item selection cursor (0) to
"CardUtility" and then press
• This causes the CARD UTIL screen to appear.
4.
Use the
move the item selection cursor (0) to "Delete"
and then press the
• This displays a screen for specifying the file to be
deleted.
dial or
5.
Use the
buttons to display the file you want to delete.
6.
Press the
7.
In response to the "Sure?" message that
appears, press the
br
the
• Pressing the
"Please Wait" (indicating the operation is in progress).
Do not perform any operation while this message is on
the display. "Complete!" appears on the display after
the operation is complete.
7
SETTING.
br
up (q) and down (w) buttons to
br
up (q) and down (w) buttons to
br
ENTER.
7
SETTING.
br
up (q) and down (w) buttons to
br
up (q) and down (w) buttons to
br
ENTER button.
bp br
dial or minus (–) and plus (+)
br
ENTER button.
br
YES button to delete or
NO button to cancel.
br
YES button displays the message
br
ENTER.
br
ENTER.