Table of Contents
Advertisement
Selecting and Creating Tones
Display Text
KeyFolBase (V)
Env.Depth (V)
Envelope >Ent
Init.Level (V)
Atk.Time (V)
Atk.Level (V)
Dcy.Time (V)
Sus.Level (V)
Rel.Time1 (V)
Rel.Level1 (V) Release level 1. Target level reached immediately after a key is released.
Rel.Time2 (V)
Rel.Level2 (V) Release level 2. Second target level reached after a key is released.
Clk.Trig
Ext.Trig
(Block (5)
only)
LFO1 Depth (V)
LFO2 Depth (V)
PulseWidth
(Blocks (1) and (2) only) (V)
PWM LFO1 Dep
(Blocks (1) and (2) only) (V)
PWM LFO2 Dep
(Blocks (1) and (2) only) (V)
Sync OSC (Block (2) only)
E-24
Key follow base. Keyboard key that is the center of key follow.
• Setting value can be specified using the keyboard keys.
Envelope depth. Specifies how the envelope shown below is applied.
Pitch envelope. Group of editable parameters for envelope (Envelope Generator)
applied to the synth OSC, PCM OSC, and pitch shifter.
• The figure below also applies to filter, amp, and other envelopes. With the pitch
envelope, the pitch of the sound corresponds to the vertical (Level) axis.
Level
AL
SL
IL
AT
DT
IL : Init Level
AT : Attack Time
AL : Attack Level
DT : Decay Time
SL : Sustain Level
Initial level. Pitch of the sound at initial note on.
Attack time. Time it takes until the attack level is reached from the initial level.
Attack level. Target level reached immediately after note on.
Decay time. Time it takes for the sound to reach the sustain level from the attack
level.
Sustain level. Level the sound is sustained as long as a key or pedal is
depressed.
Release time 1. Time it takes to reach Release Level 1 after a key is released.
Release time 2. Time it takes to reach Release Level 2 from Release Level 1.
Clock trigger. Specifies the number of beats for resetting the envelope. Selecting
a setting from 1/4U to 4U resets to the timing of the up beat.
External trigger. When on, the envelope is reset by an external trigger.
LFO1 depth. Specifies how LFO1 from Block (8) is applied.
LFO2 depth. Specifies how LFO2 from Block (9) is applied.
Pulse width. Adjusts the width of the square wave when the synth wave is a
square wave.
PWM LFO1 depth. Adjusts the depth of pulse width modulation by LFO1.
PWM
PWM LFO2 depth. Adjusts the depth of pulse width modulation by LFO2.
Oscillator sync. Turning on this resets the Block (2) sound wave in accordance
with the Block (1) sound wave period, cause them to become synced.
Description
RL1
RT1
RT2
RT1 : Release Time1
RL1 : Release Level1
RT2 : Release Time2
RL2 : Release Level2
Settings
C- to G9*
–64 to 0 to +63
RL2
Time
–64 to 0 to +63
0 to 127
–64 to 0 to +63
0 to 127
–64 to 0 to +63
0 to 127
–64 to 0 to +63
0 to 127
–64 to 0 to +63
Off, 1/4, 1/3, 1/2, 2/3,
1, 3/2, 2, 3, 4, 1/4U,
1/3U, 1/2U, 2/3U, 1U,
3/2U, 2U, 3U, 4U
Off, On
–64 to 0 to +63
–64 to 0 to +63
0 to 127
–64 to 0 to +63
–64 to 0 to +63
Off, On
Advertisement
Table of Contents
