Table of Contents
Advertisement
Menu
Precount (precount). Specifies the precount inserted before recording starts when the
Precount
record start method is manual mode (ML).
Threshold level (Threshold). Specifies the threshold level that must be exceeded by the
Threshold
input sound to start recording when the record start method is auto mode (AT).
• Setting a large value will require a loud sound to start recording.
Reverse mode (Reverse). For a new recording, plays back only the first recorded part in
Reverse
reverse.
Sampling channel (Channel). For a new recording, specifies either stereo recording or
Channel
monaural recording.
Smpl Rate
New recording sampling rate (sampling rate). Sampling frequency.
Specifies the operation after the end point of a sample is set during a new recording.
Auto OVDB
Options are automatic start of loop playback (Off) or overdubbing (On).
• Reverse mode, sampling channel, and sampling rate settings are applied only to a new recording. They are not applied
during overdubbing.
• The higher the sampling rate, the closer the sample is to the original sound. Allowable recording time depends on the
sampling rate and channel settings.
Channel/Rate
Stereo/42 kHz
Stereo/21 kHz
Mono/42 kHz
Mono/21 kHz
• You can check the current threshold level and input sound level on the screen when configuring the threshold setting.
Threshold level
■ Adjusting the tempo
8
Use the
TEMPO minus (–) and plus (+) buttons to adjust the tempo.
• For information about the tempo adjustment method, see "To change the tempo setting" (page E-46).
bp
2.
Use the
dial and
below.
• The two letters at the end of the mode name indicate the method used to start recording.
AT : Auto. The Synthesizer enters record standby and starts recording automatically when sound is input by playing on the
keyboard, with the microphone, etc.
ML : Manual. Recording must be started manually.
• To configure the settings (Length, Beats, Splits) in each Rec Mode, use the
an item and then use the
Approximate Maximum
Recording Time
4 seconds
9 seconds
19 seconds
Input level
br
minus (–) and plus (+) buttons to select one of the five Rec Modes described
bp
br
dial or
minus (–) and plus (+) buttons to change the setting.
Recording and Playing Back with the Sample Looper
Description
Maximum Recordable Beats for Each Tempo
Tempo 30
Tempo 101
Tempo 120
2
8
4
16
9
32
Off, 2 to 8
0 to 127
Off, On
Stereo: Stereo recording
Mono: Monaural recording
42 kHz, 21 kHz
Off, On
Tempo 126
Tempo 132
9
10
19
20
–
–
br
up (q) and down (w) buttons to select
Settings
Tempo 255
10
20
21
–
–
–
E-65
Advertisement
Table of Contents
