Reference; Error Messages - Casio XW-G1 User Manual

Reference

Error Messages

Display
Message
Format 1. The current memory card format is not compatible
with this Synthesizer.
2. The memory card capacity is greater than 32GB.
3. You are trying to use an SDXC card.
4. There is something wrong with the memory card.
Card Full There is not enough room available on the memory
card.
Card R/W Memory card data is corrupted.
No Card 1. The memory card is not loaded correctly in the
Synthesizer's card slot.
2. The memory card was removed while some
operation was in progress.
No Data You tried to save a Synthesizer user area (user
rhythm, user rhythm song, etc.) that does not contain
any data to the memory card.
No File 1. There is no MUSICDAT folder (page E-89) on the
memory card.
2. There is no loadable or playable data in the
MUSICDAT folder.
Not SMF0/1 You are attempting to play back SMF Format 2 file.
Protect The memory card is write-protected.
Read Only A read-only file with the same name you are trying to
use is already stored on the memory card.
Size Over 1. The data on the memory card is too big to play.
2. The data you are trying to load is too large.
3. Chain SMF data size is too large to convert the
data and save it to a card.
Wrong Data 1. The memory card data is corrupted.
2. The memory card contains data that is not
supported by this Synthesizer.
Memory Full There is not enough memory capacity required for
phrase sequencer operations.
E-94
Cause Required Action
1. Format the memory card on the Synthesizer (page
E-88).
2. Use a memory card with a capacity of 32GB or
less.
3. SDXC cards not supported. Use an SD or SDHC
memory card.
4. Use a different memory card.
Delete some of the files on the memory card to make
room for new data (page E-90), or use a different
card.
Use a different memory card.
1. Correctly load the memory card into the card slot.
2. Do not remove the memory card while any
operation is in progress.
Select a user area that contains data.
1. Create a MUSICDAT folder on the memory card or
format the memory card on the Synthesizer (page
E-88).
2. Move the file you want to load or play into the
memory card's MUSICDAT folder.
This Synthesizer supports playback of SMF Format 0
or Format 1 only.
Use the memory card's write protect switch to enable
writing.
• Use a different name to save the new file.
• Remove the read-only attribute from the existing
file and overwrite it with the new file.
• Use a different memory card.
1. This Synthesizer supports playback of song data
files with a maximum size of about 320KB.
2. The following is the approximate maximum data
sizes (per data item) when loading data into
Synthesizer memory.
User phrase: 8KB
A total of approximately 128KB of user phrase
(total of all 100 user presets) can be loaded.
3. The Synthesizer can convert up to 320KB of chain
SMF data and save it to a card.
Use a different memory card.
Shorten the phrase so it takes up less memory space.