Other Useful Functions
2
Using the Mixer
The mixer lets you make adjustments to the tone, volume
level, and other settings* of the Synthesizer's sound source
parts (Parts 01 through 16, external input parts, page E-18),
while viewing the balance between the parts on the display.
* Settings that affect individual parts are called "part
settings", wile settings that affect all parts are called
"master settings".
bn
1.
Press
MIXER.
This displays the mixer screen.
Part being configured
Setting item list
2.
9
Use the
PART minus (–) and plus (+) buttons
to select the part whose settings you want to
configure.
To perform this
adjustment:
Individual settings (page
All, 01 to 16
E-80) of parts 01 through
• "All" can be selected to batch adjust all
16
Master settings (page
Master
E-80)
• To select "Master", press the
External input part
Ext
settings (page E-80)
• To select "Ext", press the
E-78
4
5
9
Current part setting
Indicates part being configured
Select this part:
parts from 01 through 16. To select
9
"All", press the
PART minus (–)
button once while "01" is displayed.
9
PART minus (–) button twice while
"01" is displayed.
9
PART
minus (–) button three times while
"01" is displayed.
7
bn
bk
br
3.
Use the
select the item you want, and then use the
br
dial or
minus (–) and plus (+) buttons to
change its setting.
• For details about settings, see "Mixer Settings" on page
E-80
4.
After settings are the way you want, press
MIXER to exit the mixer screen.
bp
cursor (U, q, w, I) buttons to
br
bp
bn