Table of Contents
Advertisement
Using the Performance Mode
Display
Phrase 2
Tempo
Tone
Step Seq
Chain
DSP
DSP Line
Note
Ctrl Chng
Prog Chng
Ch Press
Pitch Bend
Poly Press
Effect >Ent
MIDI >Ent
Ext Out Ch
Ext In Ch
Gen Out
E-76
keyboard range C6 to B b 6. When Phrase 2 is configured, the Phrase 2 Stop operation can be
Phrase 2. Specifies the playback part and performs phrase playback. Can be assigned to
performed with key B6. Part 6 or Part 1 can be selected as the playback part. During playback,
the display segment at the top of Part 16 is lit. The key shift value during playback can be
specified.
• You can display the playback part mixer setting screen by pressing
• Playback part mixer settings are saved as a performance.
Tempo. Changes the tempo. When TAP is selected for this setting, the same operations as the
TAP button are performed. For other settings are selected, the tempo is changed in accordance
with the settings shown in the column to the right.
Tone. When a keyboard range specified for a tone is pressed, the tone of the specified zone
changes in accordance with the Tone content.
Step Sequencer. Changes the sequence being played.
Chain. Switches and turns on chains.
DSP. Switches the DSP. When Off, the Chorus/DSP select (page E-38) setting becomes
Chorus. However, DSP cannot be switched while a Solo Synthesizer tone is selected.
DSP Line. Toggles DSP Line Select for the selected part between on and off.
Note. Generates a note in accordance with the specified part number (Part), keyboard key (Key),
and velocity (Velocity) settings.
Contorol change. Generates a control change in accordance with the specified part number
(Part), control number (Control), and value (Value). When KeyOn is specified for Value, a key on
velocity value is generated. Note, however, that a 000 value is not generated when keyboard
keys are released.
Program Change with Bank MSB. Generates a program change in accordance with the specified
part number (Part), bank MSB (Bank MSB), and value (Value).
Channel Pressure. Generates channel pressure in accordance with the specified part number
(Part) and value (Value). Channel after touch. Generates a 000 value when keyboard keys are
released.
Pitch bender. Generates pitch bender in accordance with the specified part number (Part) and
value (Value). Generates a 000 value when keyboard keys are released.
Polyphonic Key Pressure. Generates pholyphonic key pressure in accordance with the specified
part number (Part), keyboard key (Key), and value (Value). Generates a 000 value when
keyboard keys are released.
• Setting can be specified using the keyboard keys.
Effect parameter. This group includes effect settings (page E-37). For details about group items,
see "Effect Settings" (page E-38).
MIDI parameters. This group includes MIDI parameter (page E-82) settings. Use the
minus (–) and plus (+) buttons to select one of the Synthesizer's 16 sound source parts for
editing.
External Out Channel. Specifies the MIDI send channel for sending information about each part
to an external destination (page E-82).
External in channel. This is the MIDI message channel received by each part.
Internal send on/off. Specifies whether or not the information of each part is sent to the
Synthesizer's sound source.
Description
bn
Settings
• Play Part: 1, 6
• Phrase:
P:0-0 to P:9-9,
U:0-0 to U:9-9
• Key Shift:
MIXER.
–127 to 000 to
+127
TAP, +, –,
30 to 255
• Zone: 1, 2, 3, 4
• Tone: Number
that can be
selected by +, –,
or "Zone Param
>Tone"
+, –,
P:0-0 to P:9-9,
U:0-0 to U:9-9
+, –,
U:0-0 to U:9-9
Off, +, –, ton,
P:0-0 to P:9-9,
U:0-0 to U:9-9
01 to 16
• Part: 01 to 16
• Key: C- to G9*
• Velocity: KeyOn,
001 to 127
• Part: 01 to 16
• Control:
000 to 119
• Value: KeyOn,
000 to 127
• Part: 01 to 16
• Bank MSB:
000 to 127
• Value:
000 to 127
• Part: 01 to 16
• Value: KeyOn,
001 to 127
• Part: 01 to 16
• Value: KeyOn,
–256 to 000 to
255
• Part: 01 to 16
• Key: C- to G9*
• Value: KeyOn,
001 to 127
9
PART
1 to 16
Off, 1 to 16
Off, On
B
Advertisement
Table of Contents
