Table of Contents
Advertisement
Selecting and Creating Tones
To edit and save a tone as a user
tone
1.
Select the tone you want to edit.
• You can select a preset tone or an existing user tone
for editing.
2.
7
Press
EDIT.
This will display the top screen of the tone editing list.
Example: First page of the Solo Synthesizer tone editing
list
List title
List
3.
br
Use
to select the item you want and change
the selected setting.
• You also can change setting by rotating the
• For details about the displayed contents, see the
information presented for each tone category in the
sections of this manual from "Editable Parameters for
Solo Synthesizer Tone" (page E-21) to "Editable
Parameters for User Wave Tone" (page E-32).
Example: To select the "Volume" item on the top screen
and change its setting to 055
The options on this screen are groups, which are
made up of multiple items. Selecting a group and
pressing
Item selection Cursor
E-20
bp
dial.
br
ENTER will enter the group.
Page
Setting
bp
br
Changes setting.
4.
After you finish with your edits, press
This exits the tone editing list.
• The edits pending indicator ( ! ) on the display indicates
that there are pending edits that have not been saved
yet. Your edits will be lost if you change to another
operation without saving them. Advance to step 5
below if you want to save your edits.
5.
7
Press
WRITE and then save your edited tone
as a user tone.
• For information about how to save user data, see the
procedure for saving user tone data (page E-12).
• For information about how to delete user tones, see
page E-83.
• The settings of some of the items on the tone editing list
can be changed using the Synthesizer's sliders, without
going through the tone editing list. See "Controlling
Sounds" in the next section.
■ Saving User Tones to an External Device
• Memory card (page E-86)
• Computer (page E-92)
Enters a group.
Exits a group.
Selects item.
Scrolls pages.
7
EDIT.
Edits pending indicator
Advertisement
Table of Contents
