Casio XW-G1 User Manual page 37

4. 5
Move the sliders (
• Refer to the table below for information about the parameters assigned to the sliders. For detailed information about each
parameter, see the reference pages included in the table.
1 5
button (Slider)
OSC BLOCK
1/9 OSC ON/OFF
2/10 WAVE
3/11 PITCH
4/12 DETUNE
5/13 PORTA TIME
6/14 P.ENV DEPTH
7/15 CUTOFF
8/16 F.ENV DEPTH
MASTER VOLUME
ENV GENERATOR
1/9 INIT LEVEL
2/10 ATK TIME
3/11 ATK LEVEL
4/12 DCY TIME
5/13 SUS LEVEL
6/14 REL TIME1
7/15 REL LEVEL1
8/16 REL TIME2
MASTER REL LEVEL2
TOTAL FILTER/LFO
1/9 TOTAL FILTER TYPE
2/10 TOTAL FILTER CUTOFF
3/11 TOTAL FILTER RESONANCE TotalFilter > Resonance
4/12 TOTAL FILTER ENV.DEPTH
5/13 LFO WAVE
6/14 LFO RATE
7/15 LFO DEPTH
8/16 LFO DELAY
MASTER LFO RISE
• In the Performance Mode or Step Sequencer Mode, you can use the
to another mode.
• PCM tones and user wave tones cannot be adjusted using the sliders.
• For more information about slider functions, see page E-52 for the Step Sequencer Mode and page E-78 for the Mixer Mode.
) to adjust the parameters currently assigned to them.
Display Text
OSC Block > OSC On/Off
OSC Block > Oscillator > Wave (Disabled for Ext OSC.)
• See the separate "Appendix" for the types of waves that can be
selected using the sliders.
OSC Block > Oscillator > Pitch (Disabled for Noise OSC.)
OSC Block > Oscillator > Detune (Disabled for Noise OSC.)
OSC Block > PortaTime
OSC Block > Oscillator > Env.Depth (Disabled for Noise OSC.)
OSC Block > Filter > CutOff
OSC Block > Filter > Env.Depth
OSC Block > Amp > Volume
• OSC Block > Oscillator/Filter/Amp > Envelope > Init.Level
• TotalFilter > Envelope > Init.Level
• OSC Block > Oscillator/Filter/Amp > Envelope > Atk.Time
• TotalFilter > Envelope > Atk.Time
• OSC Block > Oscillator/Filter/Amp > Envelope > Atk.Level
• TotalFilter > Envelope > Atk.Level
• OSC Block > Oscillator/Filter/Amp > Envelope > Dcy.Time
• TotalFilter > Envelope > Dcy.Time
• OSC Block > Oscillator/Filter/Amp > Envelope > Sus.Level
• TotalFilter > Envelope > Sus.Level
• OSC Block > Oscillator/Filter/Amp > Envelope > Rel.Time1
• TotalFilter > Envelope > Rel.Time1
• OSC Block > Oscillator/Filter/Amp > Envelope > Rel.Level1
• TotalFilter > Envelope > Rel.Level1
• OSC Block > Oscillator/Filter/Amp > Envelope > Rel.Time2
• TotalFilter > Envelope > Rel.Time2
• OSC Block > Oscillator/Filter/Amp > Envelope > Rel.Level2
• TotalFilter > Envelope > Rel.Level2
TotalFilter > FilterType
TotalFilter > CutOff
TotalFilter > Env.Depth
LFO > WaveType
LFO > Rate (Enabled only for Sync Off.)
LFO > Depth
LFO > Delay
LFO > Rise
Selecting and Creating Tones
Parameter
1
buttons to edit tones with the sliders without changing
See page:
E-23
E-23
E-23
E-23
E-26
E-24
E-25
E-25
E-25
E-24
E-24
E-24
E-24
E-24
E-24
E-24
E-24
E-24
E-27
E-27
E-27
E-27
E-28
E-28
E-28
E-28
E-28
E-35