Table of Contents
Advertisement
Using the Performance Mode
Display
DSP Line
Knob1Enable
Knob2Enable
Knob3Enable
Knob4Enable
Bend Enable
Wheel Enable
Pedal Enable
Arp Enable
Phrase Enable
Controller >Ent
K1
K2 to K4
Pedal
Touch
TchOffVel
Sequencers >Ent
Tempo
Step SEQ Number Step sequencer number. Specifies the Step Sequencer sequence (page E-52).
Solo1 Ch
Change
E-74
DSP line. This setting is the same as the mixer function part DSP line (page E-80).
Knob 1 on/off. Enables/disables
Knob 2 on/off. Enables/disables
Knob 3 on/off. Enables/disables
Knob 4 on/off. Enables/disables
Bender on/off. Enables/disables
Modulation wheel on/off. Enables/disables
Pedal on/off. Enables/disables operation of a pedal plugged in to the
ASSIGNABLE JACK for each Zone.
Arpeggio on/off. Enables/disables arpeggio function (page E-40) for each zone.
Phrase on/off. Enables/disables the Phrase Sequencer (page E-45) for each zone.
Controller parameters. This is group of editable parameters for controller.
Knob Target 1. Selects the parameter controlled by
"CC67:Soft" is specified for this setting,
CC00 to CC97: MIDI control change*
NRPN, RPN: MIDI NRPN and RPN parameters*
Ch Pressure: MIDI channel pressure*
Arpeggio: Preset arpeggio type (page E-40)
Tempo: Tempo setting (page E-46)
EQ Low Gain - EQ High Gain: Master EQ >Low Gain - High Gain (page E-38)
*1 For details about each setting, refer to the MIDI Implementation document
(http://world.casio.com/) and other MIDI documentation.
*2 After selecting these parameters, press
MSB: 63H for NRPN, 65H for RPN (Setting range: 000 to 127)
LSB: 62H for NRPN, 64H for RPN (Setting range: 000 to 127)
Send Data: Specifies whether knob operation controls MSB or LSB. (Settings: MSB, LSB)
Knob Target 2 to Knob Target 4. As with K1 (Knob Target 1), Selects the parameter controlled
3
by
K2 to K4 knob operation.
Pedal. Specifies the function of the pedal plugged in to
Hold: Pressing the pedal sustains notes. This is a sustain effect.
Soft: Pressing the pedal slightly lowers the volume of notes.
Sostenuto (Sostenut): Pressing the pedal while keyboard keys are depressed sustains (holds)
only the notes of the pressed keyboard keys.
Step Sequencer Play/Stop (SSEQ P/S): Pressing the pedal starts or stops Step Sequencer
sequence playback.
Phrase Sequencer Play/Stop (Phrase P/S): Pressing the pedal starts or stops Phrase
Sequencer phrase playback.
Phrase Record (Phrase REC): Same function as the Phrase Sequencer
Sample Looper Play/Stop (Lper P/S): Pressing the pedal starts or stops sample looper sample
playback.
Sample Looper Record (Lper Rec): Same function as the sample looper
Touch. Specifies touch sensitivity when the keyboard is played.
Off (Off): Notes sound at a fixed volume level regardless of keyboard pressure.
Normal
Light: High-volume notes are easily produced even with light keyboard pressure.
Touch off velocity. Specifies the volume level when the above touch curve setting values are off. 0 to 127
Sequencers parameter. This group includes Step Sequencer (page E-50), Phrase Sequencer
(page E-45), and Arpeggio function (page E-40).
Tempo. Adjusts the Phrase Sequencer and Step Sequencer playback tempo. You also can
change the playback tempo using
Step Sequencer solo track part. Step Sequencer Solo Track 1 is normally Part 14, but it can be
changed to Part 1 (Zone Part 1, page E-55).
Step Sequencer change timing. Specifies the switching timing when a pattern is changed by the
Step Sequencer (page E-56).
Description
3
K1 operation for each zone.
3
K2 operation for each zone.
3
K3 operation for each zone.
3
K4 operation for each zone.
bt
BENDER operation for each zone.
bt
MODULATION operation for each zone.
3
K1 knob operation. For example, if
3
K1 operation will apply a soft pedal effect.
1
*
1
2
1
br
ENTER again and then adjust the items below.
cl
SUSTAIN/ASSIGNABLE JACK.
8
TEMPO.
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
cl
SUSTAIN/
Off, On
Off, On
Off, On
Refer to the cell to
the left.
Same as K1.
Refer to the cell to
the left.
bo
REC button.
bm
REC button.
Refer to the cell to
the left.
30 to 255
Preset00 to User99
1, 14
Wait, Real, Beat
Settings
Advertisement
Table of Contents
