Master/Slave Operation
This mode allows for multiple 4BAR™s to be controlled with a single footswitch. Please see the
following instructions for the setup.
1)
Connect the footswitch to the first 4BAR™.
2)
Then, connect from the DMX Out of the Master 4BAR™ to the DMX In of the Slave unit.
3)
Set the DMX starting address of the Slave(s) to "
4BAR™ User Manual
001
".
Master
Slave
10
DMX out to other
slave fixture(s)
2/8/2012 10:53 AM