Standalone Operation; Automatic; Sound-Active; Laser Sky - Chauvet SCORPION GBC User Manual

Standalone Operation

Automatic

Sound-Active

Laser Sky

Master/Slave Operation

Scorpion™ GBC User Manual
This fixture has preprogrammed automatic programs. These are accessed via the LED
display on the back panel of the product. Please see the instructions below for further
explanation.
1. Press <MODE> until a standalone mode appears on the LED display. See the
chart under menu functions to identify these.
2. Use <UP> and <DOWN> to scroll through the standalone modes.
3. Press <ENT> when the desired automatic standalone mode has been located.
This fixture has preprogrammed sound-triggered programs. These are accessed via the
LED display on the back panel of the product. The sound control adjustment knob may be
used to adjust the microphone sensitivity. Please see the instructions below for further
explanation.
1. Press <MODE> until a standalone mode appears on the LED display. See the
chart under menu functions to identify these.
2. Use <UP> and <DOWN> to scroll through the standalone modes.
3. Press <ENT> when the desired sound standalone mode has been located.
This fixture has preprogrammed laser sky programs. These are accessed via the LED
display on the back panel of the product. Please see the instructions below for further
explanation.
1. Press <MODE> until a standalone mode appears on the LED display. See the
chart under menu functions to identify these.
2. Use <UP> and <DOWN> to scroll through the standalone modes.
3. Press <ENT> when the desired laser sky standalone mode has been located.
When operating more than one fixture in standalone mode, it is possible to link them in a
master/slave configuration. This is when one or more slave fixtures will operate identically
to the master fixture. Please see the instructions below for further explanation on how to set
a fixture to slave mode.
1. Press <MODE> until slave mode appears on the LED display. See the chart
under menu functions to identify this.
2. Press <ENT>.
A fixture that is operating in one of the standalone mode will function as a master unit when
the fixtures are linked using DMX cables in a daisy chain configuration.
14
12/17/2009 10:50 AM