1. B EFORE EGIN What is included 1 x 4BAR™ 4BAR™ transport bag Tripod stand Tripod stand transport bag Footswitch Warranty Card User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET at: 954-929-1115. 4BAR™ User Manual 1/16/2009 8:49 PM...
DMX Channel Summary HANNEL UNCTION Mode Master Dimmer Master Strobe Red 1 Green 1 Blue 1 Red 2 Green 2 Blue 2 Red 3 Green 3 Blue 3 Red 4 Green 4 Blue 4 4BAR™ User Manual 1/16/2009 8:49 PM...
Maximum recommended number of fixtures on a serial data link: 32 fixtures Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET-certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter. Note! CHAUVET Model No: DMX5M, or DMX5F. The chart below details a proper cable conversion: IN TO...
<DOWN> buttons .The device is in sound controlled mode. To switch to DMX mode, press the <UP> or *SND <DOWN> buttons S*** You can choose the desired speed of the internal programs. Default is 51 4BAR™ User Manual 1/16/2009 8:49 PM...
Footswitch operation Connect the footswitch to the 4BAR™ via the 5-pin connection cable with plug. EDAL OPTION UNCTION 1 x press White 2 x press 3 x press Green 4 x press Blue 5 x press Yellow 6 x press...
power the fixture and it will automatically enter into this mode If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location on the next page. 4BAR™ User Manual 1/16/2009 8:49 PM...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’) 4BAR™...
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET and request RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.