Dmx Linking; Dmx Personalities; Remote Device Management; Master/Slave Connectivity - Chauvet Ovation REVE E-3 IP User Manual

Table of Contents

Advertisement

DMX Linking

The Ovation Rêve E-3 IP can be linked to a DMX controller using a 5-pin DMX connection. If using other
DMX-compatible products with this product, it is possible to control each individually with a single DMX
controller.

DMX Personalities

The Ovation Rêve E-3 IP uses a 5-pin DMX data connection for the 1Ch, 5Ch, 6Ch, 8Ch, 12Ch, 14Ch1,
14Ch2, 18Ch, and HSV DMX personalities.
Refer to the
Introduction
Refer to the
Operation
personalities.
The
DMX Values
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.

Remote Device Management

Remote Device Management (RDM) is a standard for allowing DMX-enabled devices to communicate bi-
directionally along existing DMX cabling. Check with the manufacturer or the DMX controller's User
Manual, as not all DMX controllers have this capability. The Ovation Rêve E-3 IP supports RDM protocol
that allows feedback to make changes to menu map options.

Master/Slave Connectivity

The Master/Slave mode allows an Ovation Rêve E-3 IP (the master) to control one or more Ovation Rêve E-
3 IP products (the slaves) without a DMX controller. Once Ovation Rêve E-3 IP becomes the master when
running an auto or custom program, or in Static mode.
Each slave's control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
The
Operation
configure the master and slaves.
For more information about DMX standards or the DMX cables needed to link this
product to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com
8
for a brief description of each DMX personality.
chapter to learn how to configure the Ovation Rêve E-3 IP to work in these
section provides detailed information regarding the DMX personalities.
section of this manual provides detailed instructions on how to
.
Ovation Rêve E-3 IP User Manual Rev. 5
Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ovationrevee3ip

Table of Contents