Custom Engineering s'print User Manual page 37

3. PRINTER FUNCTIONS
$ 0 3
[Name] Expanded printing
[Format] ASCII
Hex
Decimal
[Description] The printer prints in expanded character mode
[Notes] • commands $00 - $09 do not cancel the print buffer
• the commands which modify the dimensions of the characters are only active at the
beginning of the line
[Default] Setting in the option register by means of the front keys
[Reference] $00, $01, $02, $04
[Example]
$ 0 4
[Name] Restore small character printing
[Format] ASCII
Hex
Decimal
[Description] The printer resumes printing with small characters
[Notes] • The commands $00 - $09 do not cancel the print buffer
• the commands which modify the dimensions of the characters are only active at the
beginning of the line
[Default] Setting in the option register by means of the front keys
[Reference] $00, $01, $02, $03
[Example]
$ 0 7
[Name] Cancel print data buffer
[Format] ASCII
Hex
Decimal
[Description] Deletes all the print data in the current print buffer.
[Notes] • If data that existed in the previously specified printing area also exists in the currently
specified printing area, it is deleted.
[Default]
[Reference]
[Example]
$ 0 A
[Name] Forward feeds one line
[Format] ASCII
Hex
Decimal
[Description] Forward feeds one line equivalent to a line of print
[Notes] • This command brings about the printing of the contents of the line buffer
[Default]
[Reference] $0B
ETX
03
3
EOT
04
4
BEL
07
7
LF
0A
10
3-3 DPT100-B/I/BT