2)
Pull up on the edge of the paper and close the cover (fig. 1.14);
3)
Tear off the paper. The printer is now ready (fig.1.15).
1.6.2 Cleaning
To clean the printer, use a vacuum cleaner or soft cloth.
Before cleaning the printer, unplug its electrical cord and make sure that the printer is off.
Do not use alcohol, solvents or hard-bristled brushes.
Do not let water or other liquids seep into the printer.
DPT100-B/I/BT
1. INSTALLATION AND USE
alcohol, solvent
1-
10
(Fig.1.14)
(Fig.1.15)
(Fig.1.16)
Need help?
Do you have a question about the s'print and is the answer not in the manual?