Using The Operator Control Panel - Pentair IntelliFloXF Installation And User Manual

6

Using the Operator Control Panel

Use the operator control panel to start and stop the pump, program, set, and change speeds
(RPM), and access pump features and settings.
Key Lockout Icon
Current Speed
Countdown Time
Controls and LEDs on Key Pad
Speed 1 button:
1
Speed 2 button:
2
Speed 3 button:
3
Speed 4 button:
4
Select button:
5
Escape button:
6
Menu button:
7
Enter button:
8
warning alerts.
Arrow buttons:
9
• Up arrow: Move one level up in the menu or increase a digit when editing a setting.
• Down arrow: Move one level down in the menu or decrease a digit when editing a setting.
• Left arrow: Move cursor left one digit when editing a setting.
• Right arrow: Move cursor right one digit when editing a setting.
IntelliFloXF ™ and IntelliProXF
750 RPM 750 RPM
T 0.00 150 WATTS
Running Speed 1
Speed Speed
1
1
2
5
Time
Quick
Out
Clean
Press to select Speed 1 (750 RPM). LED on indicates Speed 1 is active.
Press to select Speed 2 (1500 RPM). LED on indicates Speed 2 is active.
Press to select Speed 3 (2350 RPM). LED on indicates Speed 3 is active.
Press to select Speed 4 (3110 RPM). LED on indicates Speed 4 is active.
Press to select currently displayed option on the screen.
Goes one step back in menu; exits without saving current setting.
Accesses the menu items when and if the pump is stopped.
Saves current menu item setting. Press this button to acknowledge alarms and
™ Variable Speed Pump Installation and User's Guide
12:15
Speed Speed
2 3 4
Current Time
Current Power Usage
Current Feature Running
4
3
6
7
8