Pump Overview - Pentair IntelliFloXF Installation And User Manual

Pump Overview

™
The IntelliFloXF and IntelliProXF
speeds and time intervals for maximum operating effi ciency and energy conservation for
inground pools.
The pump can communicate with IntelliTouch
®
or IntelliComm communication center via an RS-485 communication cable.
• The pump can operate from 450 RPM to 3450 RPM with four preset speeds of 750, 1500,
2350 and 3110 RPM.
• The pump can be adjusted from the control panel to run at any speed between 450 RPM
to 3450 RPM for different applications.
• RS-485 commincation cable included
®
• EasyTouch and IntelliComm
®
• IntelliTouch system can be confi gured to control a total of eight speeds.
• Totally enclosed fan-cooled (TEFC) motor design.
• Self-priming for easy start-up
• UL/CUL/NSF
Pump Components
The pump includes the cover assembly (with gasket and four screws) and the union kit.
Use the control panel to set pump speeds and connect to an automation system using
communication port.
Operator Control Panel
Cover Assembly
(Gasket and 4 Screws)
AC Power Connection
Compartment
™
Variable Speed pump can be programmed to run at specifi c
®
, EasyTouch
®
can remotely control the four preset speeds.
™
IntelliFloXF and IntelliProXF
® ®
, or SunTouch
Communication port to connect to
automation control system or to
IntelliComm communication center
via RS-485 cable (not shown).
™
Variable Speed Pump Installation and User's Guide
control systems
Union Kit
(Suction and Discharge
Fittings)
1