Page 1
This manual contains important information about the installation, operation and safe use of this product. This information should be given to the owner/operator of this equipment. Pentair Pool Products 1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 Rev.
Page 2
SECTION I. INSTALLATION Notice to Installer When pump is mounted permanently within 5 ft. of the inside walls of a swimming pool, you must use a No. 8 AWG or larger conductor to connect to bonding conductor lug. Risk of electrical shock or electrocution. This pool pump must be installed by a licensed or certified electrician or a qualified pool serviceman in accordance with the National Electrical Code and all applicable local codes and ordinances.
Page 3
To Clean: 1. Turn off pump. 2. Remove lid by unscrewing (counter-clockwise rotation). 3. Remove the plastic basket and empty debris. 4. Replace the basket, fill with water, replace lid securely to prevent air from entering. Do not use tools. 5.
Page 4
This centrifugal pump requires little or no service other than reasonable care. Occasionally, however, a shaft seal becomes damaged and must be replaced. E. Protect Motor Against Heat 1. Shade the motor from the sun. 2. Provide ample cross ventilation. F.
Need help?
Do you have a question about the Pump Eagle and is the answer not in the manual?
Questions and answers