Verifying Package Contents - Cisco LRE CPE Hardware Installation Manual

Verifying Package Contents

Verifying Package Contents
Cisco LRE CPE Hardware Installation Guide
2-10
• Do not open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
• If one of the following situations arises, get the equipment checked by a
service personnel:
– The power cord or plug is damaged.
Liquid has entered the equipment.
–
The equipment has been exposed to moisture.
–
– The equipment does not work well, or you cannot get it to work
according to user's manual.
– The equipment has been dropped or damaged.
The equipment has obvious signs of breakage.
–
Do not leave this equipment in an unconditioned environment. Temperatures
•
above 45°C (113°F) can damage the equipment.
The sound pressure level at the operator's position, according to IEC 704-1:
•
1982, is equal or less than 70 dB (A).
Keep this hardware installation guide for later reference.
•
When you unpack the CPE, be sure that the package contains the items in this list.
If any items are missing, notify your authorized Cisco sales representative.
• Cisco 575 LRE, 576 LRE 997, or 585 LRE CPE
AC power adapter and power cord
•
• Mounting kit containing these items:
Four rubber feet for installing the CPE on a desktop
–
Cable lock for securing cables to the CPE
–
– Three number-8 Phillips pan-head screws for mounting the CPE under a
desk or on a wall and attaching cable lock to the CPE
– Screw template for aligning screws
Chapter 2 Installation
78-11469-04