Appendix; Connector And Cable Specifications; Connector Specifications - Cisco LRE CPE Hardware Installation Manual

Table of Contents

10/100 Ports

78-11469-04

This appendix describes the and customer premises equipment (CPE) connectors

and the cables that you use to connect the CPE to other devices.

The CPE 10/100 ports (the ENET port on the Cisco 575 LRE CPE and the

Cisco 576 LRE 997 CPE and on the ENET1 through ENET4 ports on the

Cisco 585 LRE CPE) use RJ-45 connectors with Ethernet pinouts. The ports have

the transmit (TD) and receive (RD) signals internally crossed so that a

straight-through Ethernet cable (included only with the Cisco 575 LRE CPE and

Cisco 576 LRE 997 CPE) can be attached to the port.

pinouts.

A P P E N D I X

Figure B-1

Cisco LRE CPE Hardware Installation Guide

shows the

B-1

Table of Contents

Chapters

Table of Contents