Connecting The Power Cord - Cisco LRE CPE Hardware Installation Manual

Chapter 2 Installation

Connecting the Power Cord

Step 1
Caution
Step 2
78-11469-04
Follow these steps to connect the power cord to the CPE:
Connect the power cord to the power connector on the CPE rear panel. (See
Figure 2-12.)
Figure 2-12 Connecting the Power Cord
P W R
Use only the AC power cord and adapter shipped with the CPE.
Slide the power cord under the hooks on the bottom of the CPE. (See
E N E T
W A L L P
H O N E
Cisco LRE CPE Hardware Installation Guide
Connecting the Power Cord
Figure 2-13.)
2-27