Wall Port - Cisco LRE CPE Hardware Installation Manual

Connector Specifications

WALL Port

Cisco LRE CPE Hardware Installation Guide
B-2
Figure B-1 RJ-45 Connector Pinouts
Pin Label
1 RD+
2 RD-
3 TD+
4 NC
5 NC
6 TD-
7 NC
8 NC
When connecting a CPE 10/100 port to a PC or laptop, you must use a
straight-through Ethernet cable wired for 10BASE-T or 100BASE-T.
shows the straight-through cable schematics.
The WALL port uses an RJ-11 telephone connector to connect to the Long-Reach
Ethernet (LRE) switch. See
Appendix B
Figure B-2 for the connector pinouts.
Connector and Cable Specifications
1 2 3 4 5 6 7 8
Figure B-5
78-11469-04