Chapter 2
Installation
Safety Instructions
78-11469-04
–
Das Gerät funktioniert nicht richtig bzw. funktioniert nicht, wie im
Benutzerhandbuch beschrieben.
–
Das Gerät wurde fallen gelassen oder beschädigt.
Das Gerät wurde offensichtlich beschädigt.
–
Sorgen Sie dafür, dass das Gerät nicht ungeeigneten Umgebungsparametern
•
ausgesetzt ist. Temperaturen über 45°C (113°F) können zur Beschädigung
des Geräts führen.
•
Der Schallleistungspegel ist in Bedienerposition in Übereinstimmung mit
IEC 704-1: 1982 kleiner oder gleich 70 dB (A).
•
Bewahren Sie das Hardware-Installationshandbuch für spätere
Nachschlagezwecke auf.
Read these safety instructions carefully.
•
Read all cautions and warnings on the equipment.
Place this equipment on a flat, stable surface when installing. A drop or fall
•
could cause injury.
Make sure the correct voltage is connected to the equipment.
•
•
For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
Place the power cord where people cannot step on it. Do not place anything
•
over the power cord.
Disconnect this equipment from the A/C outlet before cleaning it. Do not use
•
liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for
cleaning.
Keep this equipment away from humidity.
•
The openings on the enclosure are for air convection and protect the
•
equipment from overheating. Do not cover the openings.
If the equipment will not be used for a long period of time, disconnect the
•
equipment from A/C power to avoid any damage by transient overvoltage.
Do not pour any liquid into opening. This could cause fire or electrical shock.
•
Cisco LRE CPE Hardware Installation Guide
Preparing for Installation
2-9