Cisco LRE CPE Hardware Installation Manual page 30

Features
Table 1-1 LRE Switch and CPE Compatibility Matrix
LRE Devices
Cisco 575 LRE
CPE
Cisco 576 LRE 997
CPE
Cisco 585 LRE
CPE
Cisco LRE CPE Hardware Installation Guide
1-2
• On the 585 LRE CPE, four autonegotiating 10/100BASE-T Ethernet ports
Status LEDs showing Ethernet activity and LRE link status
•
• Data rates of up to 15 Mbps at distances of up to 4921 feet (1500 meters)
Data rates are reduced for longer distances. Data rates are configured
Note
through a Catalyst LRE switch. Refer to the switch hardware
installation guide and the switch software configuration guide for
your switch model for more information.
An internal splitter that allows regular telephone services, such as voice or
•
Integrated Services Digital Network (ISDN), to travel on the same lines as
LRE traffic.
Certain Cisco LRE CPE devices are not supported by certain Catalyst 2950 LRE
switches. In Table 1-1, Yes means that the CPE is supported by the switch; No
means that the CPE is not supported by the switch.
Catalyst 2950ST-8 LRE
switch
Yes
No
Yes
Catalyst 2950ST-24 LRE
switch
Yes
No
Yes
Chapter 1 Overview
Catalyst 2950ST-24 LRE 997
switch
No
Yes
No
78-11469-04