Basic Operation Of The Sewing Machine - JUKI LBH-1790A Series Instruction Manual

2. Basic operation of the sewing machine

1) Turn ON the power switch.
When you turn ON the power to the sewing
machine for the first time after the purchase, the
language selection screen A is displayed. Select
the language to be displayed, then press return
key ❾
.
If you terminate the language
selection by pressing return key
❾
language, the language selec-
tion screen will be displayed ev-
ery time you turn ON the power
to the sewing machine.
First, check that presser type B which has been
set is the same as that of the presser actually
mounted. For checking and setting procedures,
refer to "V-4. Input of the presser type" p.23.
2) Select the pattern No. you desire to
sew.
When the power is turned ON, the pattern No. C
which is currently selected is displayed.
When you desire to change it, press
❼
key
CHANGE
desire to sew. When you purchase the sewing
machine, pattern No. 1 to 10 described in
11. Changing sewing data" p.31
registered. Select the pattern No. you sesire to
sew from among these numbers. (The No. with
which the pattern has not been registered is not
displayed.)
3) Set the sewing machine to sewing possible state.
When READY key ❷
abled.
4) Start sewing.
Set the sewing product to the presser portion, and operate the pedal to start the sewing machine, and
sewing starts. The pedal type of the sewing machine has been factory-set to the 1-pedal type at the time
of shipment. However, the pedal operation method can be selected from among four different ones.
Select the operating procedure you desire and use the sewing machine. → Refer to
the pedal" p.21.
without selecting the
DATA
and select the No. you
"V-
have been
is pressed, SET READY LED  lights up to show that the sewing is en-
B C
 ❷
– 20 –
A
❾
❼
"V-3. How to use