Installation - JUKI LBH-1790A Series Instruction Manual

III. INSTALLATION
WARNING :
To prevent possible accidents caused by the fall of the sewing machine, perform the work by two
persons or more when the machine is moved.
(1) Preparation for assembly of the control box
❸
0.8 mm
❶
❷
❾
❼
❺
❹
1) Fix reinforcing plates ❷ on control box ❶
with bolts ❸ . (At eight locations)
* Only in the case the reinforcing plates are
supplied with the unit as accessories.
2) Fix toothed washers ❹ and rubber cush-
ions ❺ on control box ❶ . (At four loca-
tions)
* Tighten the toothed washers so that their
height becomes 0.8 mm.
3) Fix control box mounting plate ❻ with plain
washers ❼ , spring washers ❽ and nuts
❾ . (At four locations)
* Fix the mounting plate while fitting the
screw in the U-groove in the mounting
plate.
❽
❻
– 4 –